d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationProductionThe network orders are automatically printed on the Minilab with preview. Each order isprinted with the settings in the descriptive order file without operator action. Thecorrections entered under Production balance digital are effective (see ProductionBalance in Chapter 4). The dTFS (image enhancement) is also effective if the respectiveinformation is sent with the order and the conditions (see above) are met.While the Minilab processes a network order, a popup with a Stop button is displayed onthe screen. The printing can be interrupted any time by pressing this button. The currentorder in process (and in case of smaller orders also further orders, which have beentransferred to the Printer), will still be completed.The order just being processed is marked in the order list. As soon as all pertainingimages have been printed, it is automatically cleared from the hard disk and the order list.NoteIf an order is interrupted because of an error, e.g. like paper jam, it must be startedagain manually (see Manual Start of Network Orders on the following page).Processing will then continue where the order was interrupted before. Which means,that images which were printed before are not printed again (If necessary individualimages around the "abortion" point are repeated if they have not been recorded asprinted)..6Note for PricingIn case of network orders an internal order number is printed on the pricing label andnot the one that was sent with the network order.AgfaPhoto 2005-05-01 / PN 04092_01 6-103