d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

General Description, Work Routines and Operationd-lab.2, d-lab.2plus, netlab.2plus: OperationApplies to d-lab.2/2plusThe screen shows the operating hours of the scanner lamp and the machine (computer)(counter reset for operating hours of the scanner lamp: see Replacing the ScannerLamp and Counter Reset in Chapter 8).Applies to netlab.2plusThe screen shows the operating hours the machine (computer).Further information is shown in separate screens:– Film drive Info (only d-lab.2/2plus), Printer Info and Paper Processor Infoare called up by touching the respective assembly in the figure– Order Info, Version Info, Error listare called up by pressing the buttons with the respective names(see following pages).NoteIf the user logged in as user Service one more button is displayed: Service.If an error occurred the affected module is shown in red. Press the button on the module to localizethe error more precisely:The following screen then shows thedefective component in red (see exampleon the left). Press Back to exit the screen.067_red (Fig. shows d-lab.2/2plus)2-44 2005-05-01 / PN 04092_01 AgfaPhoto