d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Productiond-lab.2, d-lab.2plus, netlab.2plus: OperationFunction of the individual keys:KeysYMCDACT, DCT, SHPFunctionsColor / density corrections: Yellow, Magenta, Cyan, DensityCorrections: Area contrast (ACT), Detail contrast (DCT), Sharpness (SHP)SAT ,Correction: Saturation (SAT)Comma to separate the frame numbers0 to 9 Entry of numbers- For the input of negative corrections: MinusFor the input of frame numbers: HyphenA, X Letters for DX code OKColumn-wise navigation in the reorder listIn reorder list: line-wise navigationAfter pressing a line in the configuration column: scrolling through the list of configurationsCompleting an input in a reorder listPulldown menu during configuration: accept selection and close the pulldown menuDELDeletes one position in the frame number field, e.g. 1A-3A, 13ADeletes the complete number in the PpF field (prints per frame)Inactive in the configuration field and in the correction field. Wrong entries in the correctionfield are corrected by reentry; if no correction is desired, 0 must be typed in. Enter frame numbers with PpF (prints perframe), select corrections and configuration(several frame numbers can be entered inone line, separated by commas).NoteThe field PpF of the reorder list shows “--“. Internally this is understood as 1. An inputis only required if more than one print has been ordered.NoteWhenever the reorder list is called up, it shows the default configuration for theinserted film carrier, even if the configuration had been changed for the last order.6-42 2005-05-01 / PN 04092_01 AgfaPhoto