12.07.2015 Views

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

d-<strong>lab.2</strong>, d-<strong>lab.2</strong>plus, net<strong>lab.2</strong>plus: OperationTests Press in this order:TestStart PBLThe screen PBL for paper configuration opens. Select the paper configuration for which thePBL test is to be printed (destination):Select the configuration in the list: Selectpaper configuration. Select the paper configuration with the laserpoints you want to copy (source):Press the button Copy laser points fromand select the respective configuration.If no paper configuration was selected, thedisplay reads OFF.5NoteIt is not possible to copy data of another paperto the MBL paper.075The List of copied paper groups shows whichpaper configurations have identical laserpoints. The paper configurations which are theresult of copying are listed here one below theother.If there is more than one group, the individualgroups are separated by a hyphen. Press PBL.The Perform PBL screen opens. Enter Emulsion no., Tolerance andcalibration factors (Cal. factor red, Cal.factor green, Cal. factor blue) (seePrinting a PBL Test in this chapter). Press Start.NoteThere is no access to buttons for the optionwith laser point and the maximum densities(Dmax red, Dmax green, Dmax blue).Activation of inputs are not possible in aconfiguration with copied laser points.097AgfaPhoto 2005-05-01 / PN 04092_01 5-13

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!