12.07.2015 Views

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

d-<strong>lab.2</strong>, d-<strong>lab.2</strong>plus, net<strong>lab.2</strong>plus: OperationMaintenance8.5.7 Cleaning the Dryer RackSpecial tools– Screwdriver or coin– Lint-free cloth and warm waterCAUTION!The dryer is quite hot during operation. Risk of burning!Allow cooling down before cleaning.Before weekends:41 Remove the dryer cover. Use a coin to turnthe lock by 90º. Loosen the locking screw (knurled screw 1)of the dryer rack. Pull out the rack on thetelescopic rails. Remove only the feed roller set afterunscrewing the knurled screw (2) and put itin water over the weekend.823CAUTION!In case the rollers are not mounted priorto the automatic start after the weekend:make sure to switch off the automaticMBL to avoid paper jam (see PrinterSettings in Chapter 4).dlab2507On Mondays before starting work: Wipe off all deposits on the feed rollers andthe feed plate with a damp cloth. Clean the guide roller behind the feed rollerswith a damp cloth. Check all foam rollers (3) for damage andreplace them if necessary.AgfaPhoto 2005-05-01 / PN 04092_01 8-51

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!