d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationSettings and ConfigurationsNotes on some parameters– Print date and Print time are printed in the formats selected before under Machinesettings > User interface (see Defining the User Interface in this chapter).– Number of prints for index print always includes the index print. In case of digitalorders the size setting for an order is decisive (see Other Settings in this chapter),i.e. how often a large order is slit and how many index prints are created.– Applies only to d-lab.2/2plusIn case of index prints of APS films the number of prints per print format can beprinted additionally with number of prints H, number of prints C, number of printsP4– With new line a new line can be started if desired. All entries in front of thisparameter will be printed in the first line, all entries behind this parameter will beprinted in the second line (maximum 40 characters each). If this parameter is not used,the line break will be made when the first line is full.NoteThis parameter can only be used in the first line.– Corrections (not available for index back print) prints the color and densitycorrections of the correction configuration(see Defining and Editing Correction Configurations in this chapter) plus manualcorrections. By means of this information in the back print reorders with identicalcorrections are possible.– Manual correction (not available for Index backprint) prints only manual corrections.– There are only 8 digits available in the back print for color / density corrections(Yellow/Magenta/Cyan/Density) as well as for Area contrast, Detail contrast,Sharpness – edges and Saturation. Therefore the following abbreviations are used:-9 -8 -7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7 +8 +9I H G F E D C B A N 1 2 3 4 5 6 7 8 9Example:Back print: N N 2 N A N N 1Meaning:Yellow:0Magenta:0Cyan:+2Density:0Areacontrast:–1Detailcontrast:0Sharpn. –edges:0Saturation:+1AgfaPhoto 2005-05-01 / PN 04092_01 4-91