d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Settings and Configurationsd-lab.2, d-lab.2plus, netlab.2plus: Operation4.7 Defining and Editing Print ConfigurationsThe print configuration offers various settings which are required for a certain printproduct.004For this purpose the following configurations are defined:– Order(single, package, combi-print, reproduction)– Paper (width, surface)– Back print– Index print (all prints of an order as thumbnails on one sheet of paper)– Correction (color, contrast, sharpness, density)– Autosave (automatic saving of the image files of an order on a storage medium)– Front print (texts on the front of the print)– Combiprint (one picture several times on one sheet of paper, in the same size ordifferent sizes)Configurations of the Order type (hereinafter called order configuration;see Defining and Editing Order Configurations in this chapter) are combinations of theconfiguration types 2 to 8. Therefore these configurations are referred to as subconfigurations,they must be set up first.A sub-configuration can be used in any number of order configurations.Configuration names may have 30 characters maximum, and may include the followingspecial characters:- . : , ; + ! ? = ( ) _ / & % $ and blanks.4-84 2005-05-01 / PN 04092_01 AgfaPhoto