d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Troubleshootingd-lab.2, d-lab.2plus, netlab.2plus: Operation7.6.4 Image Processing ErrorsIt is possible that several pictures could not be printed. However, only the last image isindicated in this case. Press Clear.Error by incorrect selection of the adaptation type for file print.022_dpsiRemedy: select correct adaptation (see Order Configurations of the Single Type / FilmCarrier File print in Chapter 4):– Fit image to paper(presetting) The complete digital image is printed; in case of an image with differentaspect ratio than the paper, the print has a white border on two sides.− Fill print sizeA center cropping of the digital image is printed without a border; part of the originalimage is lost if the digital image has another aspect ratio than the paper.– Adjust: Shorter side orAdjust: Longer sideThe original image remains the same, the cut length is variable. One side of the digitalimage is adjusted to the paper width: either shorter side or longer side.If Fill print size is selected, the aspect ratio of the frame must almost correspond to thatof the print size. In case of very big differences, the error message Parameter rangeviolation is displayed. The image can then only be printed with Fit image to paper.7-10 2005-05-01 / PN 04092_01 AgfaPhoto