d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

General Description, Work Routines and Operationd-lab.2, d-lab.2plus, netlab.2plus: Operation2.5 Switching the Machine On and OffThere are several ways to switch on the Minilab:– automatically via the integrated timer:The machine switches on automatically at the set time (see Setting the Timer inChapter 4) (standard method).– manually via the ON key (if the machine is off and in timer mode)– manually via the main breaker (if the machine was switched off via the main breaker)The machine can be switched off:– manually via End of work > Shutdown; the machine is then in timer mode (standardmethod)– automatically, if no inputs are made within an adjustable time after switching on(included for incorrect timer settings, e.g. startup on holidays; the automatic switch-offfunction is disabled as soon as an input is made after switch-on).– manually via the main breaker (exception; only in emergencies or if required foroperational reasons; see Switching the Machine On and OFF with the Main Breakerin this chapter)2.5.1 Preparations Prior to Switch-on– Insert loaded paper magazines.– Only applies to d-lab.2/2plusInsert film carrier and mount the matching mirror box.Otherwise the machine cannot start up correctly, and an error message may be displayed.2.5.2 Automatic Switch-On (Timer)The Minilab starts automatically at certain times if– these staring times have been defined in the timer settings (see Setting the Timerin Chapter 4),– the machine has been switched off via End of work > Shutdown (see End of workand Shutdown in this chapter),– the main breaker has not been switched off.2-18 2005-05-01 / PN 04092_01 AgfaPhoto