12.07.2015 Views

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Productiond-<strong>lab.2</strong>, d-<strong>lab.2</strong>plus, net<strong>lab.2</strong>plus: Operation6.3.3.2 Image Editing and PrintingSeveral film strips or single negatives can be combined in one order. Insert all film stripsor single negatives of an order and print as described below.Insert and position the film strips or negatives Insert the negative(s).Insert film strips with at least twonegatives or complete films via the filmfeeder:They are pulled in, scanned, andpositioned on the film tip.Single negatives: Pull out the filmcarrier, put in the negative, and push inthe carrier.The first frame of the film strip is displayed; in case of a single negative only the scannedpart of the film piece is shown. It must then be positioned correctly.013Position a negative within a longer piece of film: Press Frame to move longer film piecesback and forth by always one frame lengthuntil the desired negative is shown.Position single negatives: Press Step to move the frame in small stepsto an exact position. In the preview theremoved part of the image is cut off, the newpart added is marked, but shown withoutdata. Press Refresh:The negative is scanned again, the previewis refreshed. Repeat the operation (Step and Refresh)until the desired result is obtained.6-52 2005-05-01 / PN 04092_01 AgfaPhoto

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!