d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationSettings and Configurations4.5.18 Setting Color and DX Corrections (for Color Negatives)Applies only to d-lab.2/2plusThe Color corrections screen (see below for activation) allows the input of generalcorrections. They apply to all film types.Individual corrections can be entered additionally for each defined DX code in theDX Configurations screen (see next page for activation). These corrections can besaved in the DX configurations (e.g. if certain films are not printed with satisfying resultsin spite of TFS, or if they do not correspond to the general taste in a country). Duringprinting the individual corrections are added to the general corrections when therespective DX code is detected.Separate inputs for neutral, overexposures and underexposures are possible in bothscreens.4NoteThe corrections are immediately effective and not only after a restart.NoteThe changes made for color and density corrections are added to the generalcorrections of the basic balance. Therefore they do not show in the backprint.4.5.18.1 Color CorrectionsApplies only to d-lab.2/2plusCall up: Press the Color correction button in theProduction balance screen.The Color corrections screen opens. In thisscreen color and density values applying to allfilms can be entered.Enter correction values for neutral exposure,overexposure and underexposure: Press left or right Arrow key for the requiredparameter to increase or decrease the value.101AgfaPhoto 2005-05-01 / PN 04092_01 4-75