d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Productiond-lab.2, d-lab.2plus, netlab.2plus: Operation412321 mmFilm status indication: unexposed partly exposed fully exposed but not developed developed film IPI: Irreversible Process Indicator(pushed in for developed film)APS_cartAPS films are inserted in a separate unit in thefilm feeder. Insert the APS film in this feeder unit.6.1.8 End of Order (Automatic / Manual)The orders are completed by end of order. After an end of order the sorter switches to thenext bucket, so the prints are sorted in separate buckets according to the orders.Special cases:– The sorter switches to the next bucket without order end if an order exceeds thecapacity of one bucket (max. 40 prints).– Splices in the paper rolls are cut separately and the respective pieces of paper aredeposited in the print order stack.If after an end of order a negative or slide is scanned (only d-lab.2/2plus), or an image fileis loaded, this starts a new order. This new order automatically gets a new order number.Automatic end of order is activated:Applies to d-lab.2/2plus– In Autoprint mode: if a film (strip), which exceeds a certain adjustable length, leavesthe film drive (see Other Settings < Film Length in Chapter 4).– In Reorder, File print and Network order mode if all images of the order have beenprocessed.– Upon changing to another print mode.– When the film carrier is changed.– When the film stop key (STOP key) on the machine is pressed.– When the Stop button on the screen is pressed (attention, the order is not complete ifthe last print has not yet left the Printer section)..Applies to netlab.2plus– In File print and Network order mode if all images of the order have been processed.– Upon changing to another print mode.– When the Stop button on the screen is pressed (Attention! This order is incomplete ifthe last picture has not yet left the Printer section).6-20 2005-05-01 / PN 04092_01 AgfaPhoto