d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationProduction6.1.6 Select or Change ConfigurationWhen a print mode is called up (see Printing in this chapter) the default orderconfiguration for this print mode is pre-selected (in the d-lab.2/2plus under considerationof the inserted film carrier). Now it is possible (except in Network order mode):– to display the selected configuration,– to change the selected configuration for the current order (these changes are notsaved),– or to select another configuration.6.1.6.1 Configuration Types for Print OrdersFour types of order configurations are available for printing(see Configuration Types for Print Orders in this chapter, as well as Defining and EditingOrder Configurations in Chapter 4):– S Single– P Package– C Combi-print– R ReproductionOnly one order configuration can be selected per order.– SingleAll prints of the order are printed in the same format.– PackageA package has several order configurations of the types Single, Combi-print, and/orReproduction combined so that different formats are printed of every image file of anorder.– Combi-printAn image is printed several times on one sheet of paper (in the same size or differentsizes).Combi-prints can be made from negative (only d-lab.2/2plus), slide (onlyd-lab.2/2plus), and image files.– Reproductionfor digital images: The image files of an order are printed without the automatic imageimprovement and without image size adaptation so that the prints correspondprecisely to the original.Application: images created with an image processing program or exposures that areartificially falsified.Printing is without preview; the configuration cannot be changed.If the image file is– too big with respect to the paper size, the image is cut.– to small with respect to the paper size, the image gets white borders.– approx. 3 times smaller than the paper size, image processing artifacts may occur.6AgfaPhoto 2005-05-01 / PN 04092_01 6-11