d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationChanging ChemicalsWARNING!Only work with liquids if the machine is switched off (main breaker off). This is toavoid short circuits and electric shock by splashing or leaking chemicals, andsplashing or leaking water.When you change chemicals only switch on the machine if this is required for thetype of work.Only operate the machine with closed Paper Processor cover.31. Preparation of machine tanksNoteWhen working on the machine tanks (open Paper Processor cover): To make sure thatno chemistry splashes on the machine, we recommend to fasten the plastic covers(splash guard) of the accessory box on the machine. Remove possible chemicalsplashes on the covers of the Minilab immediately (they may cause stains). Keep containers, which can be closed, forcollecting the old chemicals and thecleaning water (capacity 2 x 20 liters eachfor developer – CD and bleachfix – BX,50 liters for stabilizer – SB). Shut down the machine as described in Endof Work and Shutdown in Chapter 2 andswitch off the main breaker. Open the door bottom left side on the PaperProcessor. Connect a hose on all taps on the right (1),one after the other, open the tap and drainthe old solution into the container. Close all taps (1), close the door.dlab2601AgfaPhoto 2005-05-01 / PN 04092_01 3-5