d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationIntroduction11.3.3 Warranty1.3.3.1 Liability of the OwnerWarranty and availability clauses are subject to the following conditions:– The Minilab is only operated by persons who participated in the detailed AgfaPhototraining and are able to proof this.– The required power supply for the operation of the Minilab, as well as chemicals andother consumables must be provided according to the instructions.– All instructions regarding the operation and maintenance of the Minilab as given byAgfaPhoto must be followed.– Maintenance of the machine must be performed in compliance with the instructionsgiven by AgfaPhoto.– The use of other wear and tear parts or spare parts than the original parts by AgfaPhotoresults in immediate termination of warranty, availability and guaranty claims.1.3.3.2 Warranty and LiabilityThe equipment has been built and tested in compliance with the standards and rules aslisted in the section Applied Standards and Rules, and left the factory in perfect and safeworking condition. To keep this condition and guarantee an operation without any risks,the user must observe the notes and warnings in this Operation Manual. Owner and userwill be liable and must ensure that all safety features and devices, as well as theconditions in the machine environment are provided and followed in a suitable measure.The general terms and conditions of sales and delivery of the AgfaPhoto GmbH apply as amatter of principle. The owner receives these terms at the time of contract conclusion orbefore.Warranty and liability claims in case of personal injuries and property damage areexcluded if they are the result of one or more of the following causes:– improper use of the Minilab;– incorrect assembly, operation, handling or maintenance of the Minilab;– non-observance of notes in the Operation Manual with respect to transport, storage,assembly, switch-on, operation, and maintenance of the equipment;– high-handed changes on the Minilab;– inadequate monitoring of assemblies of theMinilab, which are subject to wear and tear;– incorrectly made repairs;– catastrophic cases that are due to external impacts and force majeure.A correct and safe operation of the equipment also requires correct transport, correctstorage, correct installation and assembly, as well as careful operation and service.Guaranty regulations are up to the countries. For information refer to the sales contract orthe warranty certificate.AgfaPhoto 2005-05-01 / PN 04092_01 1-7