d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationSettings and Configurations4.5.16 Setting TFS Density (only for Color Negatives)Applies only to d-lab.2/2plusTFS allows the automatic detection of certain groups of motifs in which a selectivedensity correction can then be made.We differentiate five groups of motifs which each have a parameter assigned for separatecontrol.4Parameter Function RangeDL 1 Flash shots (flash portraits or light objects in front of a dark background) 0.0–2.0DL 2DL 3DL 4High-contrast backlight, snow, or beach shots, landscapes with large parts of abright skyLow-contrast snow shots, gray water surfaces with overcast sky, hazy visibility,etc.Persons with white clothes (e.g. wedding dress) on a green meadow, view throughtrees, flowers with a green background, etc.0.0–2.00.0–1.40.0–2.0DL 5 Motifs with a high percentage of blue 0.0–1.4Step width: 0.1Standard setting: 1.0Higher values always result in darker prints and lower values in lighter prints, i.e. theyreduce the density (individual deviations from the standard value 1.0 are possible ofcourse!). This applies to all parameters.NoteWe recommend to keep the standard setting of 1.0 for all density parameters, as everydeviation from the standard value of a motif group not only means an improvement forthis group, but also entails a negative effect on other motif groups.AgfaPhoto 2005-05-01 / PN 04092_01 4-71