d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationSettings and ConfigurationsThe Surfaces screen opens. Press PFDF surface and select the desiredentry from the listPulldown menu with the PFDF (PhotoFinishing Data Format) standardized surfaces(important for network orders), e.g. Glossy,Fine grained, Silk.4020The buttons Switch 5 and Switch 6 define the code for the paper surface. For theAgfaPhoto standard code refer to the table in Paper Codes according to AgfaPhotoStandard in this chapter. It is also possible to use other codes. However, make sure thatthe same code, which is defined here, is set on the paper magazine for the respectivesurface (see Paper Magazine Codes in Chapter 6). Otherwise errors occur in production. As required the switches Switch 5 andSwitch 6 can be switched on or off.A switch is on if the slide on the papermagazine is closed;switch off means the slide on the papermagazine is open. Press Save as.Enter the name of the new surfaceconfiguration.Orpress Save.(This option is only displayed if the screenwas called with Edit.)Up to four different surfaces can be defined (independent of width and cut length).AgfaPhoto 2005-05-01 / PN 04092_01 4-15