d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Productiond-lab.2, d-lab.2plus, netlab.2plus: Operation6.1.4 Order TracingDuring printing an order number is assigned to each order. This order number can beprinted on the back of the print together with various other information (see Definingand Editing Back Print Configurations in Chapter 4). This simplifies the allocation of printsand film.Applies only to d-lab.2/2plusThe film and the envelope must be identified so that an order can be traced and theenvelope, the film and the prints can be combined. For this, stickers with numbers (TwinCheck labels) are used. The same number is put on the order envelope and on the film tip.Applies only to d-lab.2/2plusWhen the prints are in the sorter bucket, the film is cut into strips and sleeved intotransparent sleeves in an optional film sleever, e.g. AgfaPhoto FS1. The strips and theprints are put in a photo bag which is then inserted in the order envelope.With the optional accessory Pricing Software and Label Printer orders can be priced andprice labels can be printed (see Pricing Settings in Chapter 4, Printing Price Labels(Option) in this chapter and in the Operating Instructions delivered with the Label Printer).6.1.5 Changing the Order NumberIf you call up a print mode the corresponding screen opens. The order number is displayedin top left corner.After switching on or after a reset of the Minilab the order number is always set on 1. Forfurther order it then increments automatically, even if the print mode is changed.If the machine is set up accordingly the order number can be changed (Order no. >manual; see Other Settings in Chapter 4). It cannot be changed if the option Orderno. > automatic has been selected. Press Change? Enter the desired order number (3 digits) andconfirm with OK.If the number exists already, a prompt comes upwhether to overwrite the order.For the following orders the order number will beincremented starting with the entered number.042_start6-10 2005-05-01 / PN 04092_01 AgfaPhoto