d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationProduction– Manual positioningFor the printing of films without the extended DX code and for the printing of singlenegatives or short film strips which cannot be printed in Autoprint mode (always withpreview, the same formats can be printed as in Autoprint).– Slide printFor the printing of slides (of 135-type film, mounted, always with preview).– Slide film(Option; only available after activation (see Installing / Activating Software inChapter 4)To print prints of reversal film strips (135 and 120/220 films).Digital prints:– File printTo print images of digital sources in the formats: ".jpg" (also JPEG2000 andprogressive compression), ".bmp" or ".tif" (also with LZW compression). The imagedata is loaded– from mobile data carriers or– a drive in a PC integrated in the networkand printed on the minilab (with or without preview, as desired).6Applies to d-lab.2The following drives are available on the main computer: Floppy disk, CD-ROM/DVD,Zip, memory cards (PCMCIA, Compact Flash, MicroDrive, Smart Media, Memory Stick,SD/MMC memory card).Applies to d-lab.2plus, netlab.2plusThe main computer offers a floppy disk drive, the drive bay offers drives for thefollowing media: CD-ROM/DVD, Zip, memory cards (PCMCIA, Compact Flash, SmartMedia, Sony Memory Stick, SD/MMC).– Network orderFor the printing of digital orders, which have been completely prepared on aworkstation. These orders are transmitted via network to the Minilab where they areprinted automatically.The start may be either automatic to use idle times (times without operator action), ormanual, i.e. it is triggered by the operator.See Network Orders in Chapter 6AgfaPhoto 2005-05-01 / PN 04092_01 6-3