d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Settings and Configurationsd-lab.2, d-lab.2plus, netlab.2plus: Operation4.8.3 Defining and Editing Order Configurations of the Combiprint TypeNoteApplies to d-lab.2/2plusIn an existing order configuration the settings for Config. type and for Film mask canno longer be changed. If you edit an order configuration the Config. type button isinactive. If you change the setting for the film mask the software will switch from Editto New: i.e. in this case you are no longer editing the selected configuration, but youdefine a new configuration.Applies to netlab.2plusIn an existing order configuration the setting for Config. type can no longer bechanged. If you edit an order configuration the Config. type button is inactive.4.8.3.1 Film Mask: 135, 120, 110Applies only to d-lab.2/2plus022_negkp If the screen Combiprint orderconfiguration was called up with New:press Config. type and select Combiprint. Press Film type and select (Color negativeor BW). Press PpF (number of prints per frame) andenter the desired value:preset value = 1 (range 0 to 999). Sub-configurations Indexprint, Backprint,Correction, Autosave, Front print: pressthe button and select the respective subconfigurationfrom the list or set to Off. Press Combiprint and select the desiredconfiguration. Press Save or Save as and enter the name.4-120 2005-05-01 / PN 04092_01 AgfaPhoto