d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Productiond-lab.2, d-lab.2plus, netlab.2plus: Operation6.2 Preparing the Machine for Different Orders6.2.1 Changing the Paper Magazine and Loading PaperNoteThe paper must be taken out of the cool storage at least 24 hours before use so thatpossible condensation may dry again.The Minilab holds two paper magazines. The magazines accept papers of the followingwidths:Minilab Paper magazine Paper widthd-lab.2 left hand paper magazine 82–210 mm 3.25– 8.25 inchright hand paper magazine 82–305 mm 3.25–12.00 inchd-lab.2plus, netlab.2plus left hand paper magazine 82–305 mm 3,25–12,00 inchright hand paper magazine 82–305 mm 3,25–12,00 inchThe paper is inserted in the d lab.2 in several steps which are explained in detail in thefollowing paragraphs: Remove the paper magazine. Take out any paper, if necessary, in thedarkroom. If paper of a different width is to be loaded,set the paper magazine to the desired paperwidth. Go to a darkroom to load the paper in thepaper magazine. Set the magazine code for paper width andsurface. Insert the magazine in the Minilab. Cut the leading paper edge, if necessary(automatic function).6-26 2005-05-01 / PN 04092_01 AgfaPhoto