12.07.2015 Views

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

d-<strong>lab.2</strong>, d-<strong>lab.2</strong>plus, net<strong>lab.2</strong>plus: OperationSettings and ConfigurationsIf d-workflow was selected: Press Resolution.Select the desired resolution (four differentresolutions are offered).NoteApplies only to d-<strong>lab.2</strong>/2plusSlide prints: In case of slides printed at a sizeof 20x30 or bigger, select the resolution3000x2000 to avoid blemishes in the savedslides.4029_pdm Press File format.Select “.bmp“ or “.jpg“ with differentcompression factors.The address of the PC where the d-workflowis installed, must be defined before; see Settings for Digital Orders (Network Orders)in this chapter. Press CD, Internet Upload, Normal,to activate / deactivate the respective typeof further processing.If one of more of these options are selected,the saved image files in the correspondingorder file are marked.This marking allows an automatic furtherprocessing of the files via the programsconnected with the d-workflow, e.g. writing aCD. Press Save or Save as and enter the name.Applies only to d-<strong>lab.2</strong>/2plusIn case of negatives the DX code istransmitted to the d-workflow as part of thefile name:File name = DX code_consecutive numberNotePFDF (Photofinishing Data Format):The Minilab can only return orders in the Format PFDF 4.2 to the d-workflow .AgfaPhoto 2005-05-01 / PN 04092_01 4-103

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!