d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationGeneral Description, Work Routines and Operation2.4 Controls on the Minilab2.4.1 Keys and Pilot LampsApplies to d-lab.2/2plus1 ON key2 Timer lamp3 STOP key (film stop key))2123G-GG212_2 (Fig. shows d-lab.2)Applies to netlab.2plus1 ON key2 Timer lampG-PC713_2 (Fig. shows netlab.2plus)12ON key (1)If the machine is shut down by the menu command End of work > Shutdown, it remainsin timer mode until the next automatic startup. If you want to work before the timer startsthe machine again automatically, press the ON key to switch on (see End of Work andSwitching the Machine Off in this chapter, as well as Setting the Timer in Chapter 4).Furthermore the ON key can be used for a reset while the machine is running (see Reset via the ON key in Chapter 7).Timer lamp (2)The timer lamp lights up if the machine is in timer mode after shutdown via End ofwork > Shutdown.STOP key (film stop 3; only d-lab.2/2plus))If a film jam occurs or you assume a film jam, you can press the film stop key to stop thescanner immediately. Film scanning stops, the order is canceled, and the machine isreset. The reset popup is shown on the screen with the button Yes. Press this button onlyif there is no more paper in the Printer (otherwise this may cause a paper jam).See Problems During Scanning in Chapter 7.AgfaPhoto 2005-05-01 / PN 04092_01 2-15