d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Settings and Configurationsd-lab.2, d-lab.2plus, netlab.2plus: Operation4.4.8.1 General settingsIn the screen Other settings: Press Lab ID and enter:If the Minilab is integrated in a networkto receive orders (e.g. network orders) orsend orders (e.g. autosave), the enteredLab ID must be the same number as theone in the d-workflow program.The Lab-ID may be used as a machinespecific identification number within alaboratory. It can be included in theback print. Press Lab name and enter:The name can be selected as desired. Can beincluded in the back print. Press Order no. and select from the list:ManualThe operator can change the order numberdisplayed during processing of an order.orAutomaticThe machine assigns the order number and itcannot be changed. Activate / deactivate Back print.If this parameter is inactive no back printwill be made during printing whether it isincluded in the configuration or not.NoteThe setting of this parameter has no influenceon network orders (print mode Networkorder). In case of network orders the back printis controlled by the order data created on anexternal workstation.4-44 2005-05-01 / PN 04092_01 AgfaPhoto