12.07.2015 Views

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

d-<strong>lab.2</strong>, d-<strong>lab.2</strong>plus, net<strong>lab.2</strong>plus: OperationTroubleshooting Press ON (reset key) to start the reset.NoteApplies only to d-<strong>lab.2</strong>/2plusDo not pull out the film carrier during thereset, to avoid errors during pixel correction(see Calibrate Scanner (Pixel Correction,PIKO) in Chapter 5).The data base is saved automatically prior to the reset. After the reset the machine startsup again and loads the last consistent backup.The customer does not lose data, the machine is in the same status as it was before theON key was pressed.7AgfaPhoto 2005-05-01 / PN 04092_01 7-7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!