d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationAbbreviations and GlossaryIndex printIndex print layoutKLab-ID(only d-lab.2/2plus)Laser working pointL-contr. LCT(only d-lab.2/2plus)LD(Applies to d-lab.2)L-density LDT(only d-lab.2/2plus)LSMainscan(only d-lab.2/2plus)Master paperMBL testMLMRMwStPPackagePanorama(only d-lab.2/2plus)Paper configurationPBL testPDMPE(Applies to d-lab.2)PFDFPIKO(only d-lab.2/2plus)PixelPMApplies to d-lab.2plus/netlab.2plusPOPopup windowPrinting of the image thumbnails on one sheet of paperIndex print layouts are used for the printing of index printsShift correction: TFS parameter to define the impact of the color correction in unbalancednegativesMachine-specific identification number within a laboratoryRequired for the calibration; to determine the exposure limits of the respective paperwidthLuminance contrast; parameter in correction configurations for slides; influences thecontrast of slide prints without changing the color saturationLane Distributor: old term for the sheet distributor SDLuminance density; parameter in correction configurations for slides; influences thebrightness of slide prints without changing the color saturationLight Sensor or Lane ShifterMain scan to print negatives and slides (also see prescan).The most commonly used paperMaster Balance test: the MBL test compensates for slight fluctuations of the chemicalsolutions.Magazine Left: paper magazine, left hand sideMagazine Right: paper magazine, right hand sideMehrwertsteuer = German for Value Added Tax (sales tax)Panorama (see there)Order configuration for automatic printing of several print sizes per negative, slide, orimage fileSpecial print size for APS films (IX240 film format); aspect ratio 1:3Setup of paper width and surface.Paper Balance test: The PBL test compensates for the differences among the variouspaper types and widths, and provides for uniform rendering of the colors on all paperemulsions in use.PFDF Data Manager (e.g. d-workflow) manages the order files. Saving of digital orders(images and PFDF information) until they are called by a receiving station.Print Engine: exposure unitPhoto Finishing Data Format: standardized format for order data to be used in networks.Pixel correction (German: Pixelkorrektur): Balancing of the individual pixels of the CCDchip so that the black value (dark current) and the white value (sensitivity) are identical /reproducible for the subsequent signal processing.Pixel, image pointPrint MachinePaper OutletOpened in the active screen if a confirmation or an action by the operator is required.12AgfaPhoto 2005-05-01 / PN 04092_01 12-3