d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Settings and Configurationsd-lab.2, d-lab.2plus, netlab.2plus: OperationNoteIn addition to the automatic red eyes correction the minilab also offers a manual redeyes correction. The following paragraph describes how to activate and deactivate theautomatic red eyes correction. The manual red eyes correction can be usedindependent of the automatic function (see Manual red eyes correction inChapter 6).NoteThe function red-eye correction (automatic and manual) is only available if the optionhas been activated (see Activating software in this chapter). Go to the Production Balance screen orProductions Balance digital and press thebutton Red-eye correction to activate ordeactivate the function.NoteThe automatic red eyes correction can be generally activated and deactivated in theproduction balance.This setting can be changed again for the current order in the print modes with preview(see Printing in Chapter 6).It can also be overwritten by means of correction configurations (see Defining andEditing Correction Configurations in this chapter). A correction configuration can beassigned fix to an order configuration (see Defining and Editing Order Configurationsin this chapter) or it can be activated just for one individual order (see Changing theConfiguration for the Complete Order in Chapter 6).4-62 2005-05-01 / PN 04092_01 AgfaPhoto