12.07.2015 Views

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Maintenanced-<strong>lab.2</strong>, d-<strong>lab.2</strong>plus, net<strong>lab.2</strong>plus: OperationLamphouseApplies only to d-<strong>lab.2</strong>/2plusG_GG212_61 Hold the venting grids (1) in the middle ofthe edge, push them out and remove them. Remove the filter mat:If filters are not very dirty, clean themwith compressed air or wash them inwater.In case of very dirty filters, replace them(order number CM+9.8061.LHL5.0). Insert the filter mat:chamfered side to the front / up,soft side facing out. Close the venting grid and engage it.CCD fanApplies only to d-<strong>lab.2</strong>/2plusAir is sucked in through the film chute and cools the electronics via the CCD fan (1).1 CCD fan2 Knurled screw Open the Printer front door. Open the knurled screw (2). Remove the cover (1). Replace the filter.(order number CM+9.8061.FEL4.0) Close the cover again. Close the Printer front door.12G_SP7018-42 2005-05-01 / PN 04092_01 AgfaPhoto

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!