12.07.2015 Views

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

d-<strong>lab.2</strong>, d-<strong>lab.2</strong>plus, net<strong>lab.2</strong>plus: OperationMaintenance8.5.2 Checking and Calibrating the Solution TemperaturesSee Setting Temperatures and Calibrating Sensors in Chapter 4.8.5.3 Cleaning or Replacing the Air FiltersLet washed filters / filter mats dry well before putting them back.Do not wring, bend or press them hard.Do not let them dry in the sunshine.NoteThe service life of the filter mats depends on the air conditions at the operation siteand on the operation time of the machine. In case of long operation times andunfavorable air conditions, the filters must probably be replaced more often.16Position of the air filters:1 Lamphouse (only d-<strong>lab.2</strong>/2plus)2 AC power supply and dryer3 CCD fan (only d-<strong>lab.2</strong>/2plus)4 Below the cutter units5 Printer side door8NoteCleaning and replacement of the air filters 1–5are explained below. For cleaning andreplacement of air filter 6 see Cleaning thepaper outlet (PO) in this chapter.5432G_GG201_5 shows d-<strong>lab.2</strong>)AgfaPhoto 2005-05-01 / PN 04092_01 8-41

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!