d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Troubleshootingd-lab.2, d-lab.2plus, netlab.2plus: Operation7.7.3 Paper Jam in the Transport Unit (TU)Applies to d-lab.2A paper jam in the transport unit may occur in the following positions:– transfer sheet bridge (SB) / transport unit (TU)– lower paper channel– upper paper channelCAUTION!In case of a paper jam in the transport unit (TU) always pull out the print engine(PE) first and then the transport unit!Otherwise paper which may be in the transfer area of transport unit / print enginemay damage the machine (paper guides, transport rollers, etc.) or if the papertears, small paper pieces may remain in the machine and result errors duringproduction.A paper jam in the transport unit is indicated by an illuminated red LED.Only if the green LED is on the transport unit can be pulled out (analog to papermagazines)!Pulling out the print engine (PE)1 Open the Printer side door. Open the levers of the print engine: twolevers (1). Pull out the print engine (2) completely.2dlab20057-16 2005-05-01 / PN 04092_01 AgfaPhoto