d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Settings and Configurationsd-lab.2, d-lab.2plus, netlab.2plus: Operation351The Combiprint configuration screen opens. Press Layout and select the desired layoutfrom the list.Displayed are only those layouts whichmatch the film mask selected before. Press Paper config. and select the requiredoption from the list.All paper configurations with a widthcorresponding to the width of the layout canbe selected. Press Cut length and select the requiredoption from the list.All defined cut lengths will be listed.If the paper configuration corresponds to thewidth of the layout, the cut length will beset to the value that is closest to the lengthof the layout. If applicable press Edit text template.On the following screen a customer textdefined in the layout, can be changed or textcan be added (see Description of LayoutSoftware – as of SW 5.12).The screen Edit text templates opens. Press on the desired text field and make thetext changes. Press OK.340The Combiprint configuration screen opensagain. Press Save or Save as and enter the name.4-108 2005-05-01 / PN 04092_01 AgfaPhoto