d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Settings and Configurationsd-lab.2, d-lab.2plus, netlab.2plus: Operation Activate one of the following options (theoption exclude each other; if one option isactivated, the previously active optionautomatically becomes inactive):Fit image to paper(presetting) The complete digital imageis printed; if the image has anotheraspect ratio than the paper, a whiteborder remains on two sides.Fill print sizeA center cropping of the digital image isprinted without a border; part of theoriginal image is lost if the digitalimage has another aspect ratio than thepaper.Adjust: Shorter side orAdjust: Longer sideThe original image remains the same,the cut length is variable. One side ofthe digital image is adjusted to thepaper width: either shorter side orlonger side.NoteIf a border has been selected it will beconsidered in the adjustment. Press Save or Save as and enter the name.NoteIf set up accordingly, the Minilab calls up completely prepared network orders (imagefiles plus order description) during the idle times or when requested by the user, andthese orders are then printed automatically.See Settings for Digital Orders (network orders) in this chapter and Network orders inChapter 6.Prerequisites:Order configurations corresponding to the descriptive order file must be available onthe Minilab. These are configurations for which the option File print was selected inthe Film mask box.4-114 2005-05-01 / PN 04092_01 AgfaPhoto