12.07.2015 Views

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

d-<strong>lab.2</strong>, d-<strong>lab.2</strong>plus, net<strong>lab.2</strong>plus: OperationSettings and Configurations4.5.13 Panorama Identification (only for Color Negatives)Applies only to d-<strong>lab.2</strong>/2plusTFS detects panorama exposures on 135-type films. The function must be activated toprint panorama sizes correctly. Otherwise the panorama prints have black bars. Press Panorama identification, to activate/ deactivate the function.44.5.14 Color / Density Logic (TFS; only for Color Negative)Applies only to d-<strong>lab.2</strong>/2plusTFS: AgfaPhoto Total Film Scanning; (explanation see Using TFS (only for colornegative) in this chapter). Press the Color / Density logic button inthe Production balance screen to activate /deactivate the function.079The buttons TFS Color and TFS Density are accessible if the function is active. Thesebuttons call up further screens in which color and density parameters for the color anddensity logic can be changed (see Setting TFS Color (only for color negative) andSetting TFS Density (only for color negative) in this chapter.NoteWe recommend to keep this function always activated, and to switch off only forspecial test purposes, e.g. test of the mixed printing.NoteCertain parts of the logic are effective even if the regulators have not been changed.AgfaPhoto 2005-05-01 / PN 04092_01 4-65

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!