d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Troubleshootingd-lab.2, d-lab.2plus, netlab.2plus: Operation7.6.6 Printer ErrorsMessages like for example:Paper in the Printernn_LSxx not reachednn_LSxx not freeTU2 not readynn = PE (Print Engine; d-lab.2) orPM (Print Machine; d-lab.2plus, netlab.2plus)LD (Lane Distributor; d-lab.2) orSD (Sheet distributor; d-lab.2plus, netlab.2plus)TU (Transport Unit; d-lab.2) orFU (Feeder Unit; d-lab.2plus, netlab.2plus)LSxx = light barrier number xx First remove the paper from the Printer, orotherwise further errors may occur (see Removing a Paper Jam in this chapter). Only then press Clear.Messages like for example:Shutter not reached (MR, ML)SG_LS01 not reachedMR / ML = Magazine Right / Magazine LeftSG = Switching Gear Pull the locking lever of the paper magazineback, remove the paper magazine, check thepaper for correct positioning in the papermagazine, push the paper magazine back in. Only then press Clear.7.6.7 Other ErrorsThe machine stops without a message or there is no exit from a menu. Press the Stop button on the screen. Wait until there is no more paper in thePrinter and then confirm the reset.7-12 2005-05-01 / PN 04092_01 AgfaPhoto