d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationTroubleshooting7.8.3 Paper Jam in the Feeder Unit FUApplies to d-lab.2plus/netlab.2plusA paper jam in the FU may occur in the following positions:– transfer sheet bridge SB / feeder unit FU– crossover in the FU– lower paper channel– upper paper channelCAUTION!In case of a paper jam in the feeder unit FU always pull out the print machine PMfirst and then the feeder unit FU!Otherwise paper which may be in the transfer area FU / PM may damage themachine (paper guides, transport rollers, etc.) or if the paper tears, small paperpieces may remain in the machine and result errors during production.A paper jam in the FU is indicated by an illuminated red LED.Only if the green LED is on the FU can be pulled out (analog to paper magazines)!7Pulling out the print machine PM1 Open the Printer side door. Open the lock of the print machine: twolevers (1). Pull out the print machine completely (2).2dlab2005AgfaPhoto 2005-05-01 / PN 04092_01 7-31