d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Settings and Configurationsd-lab.2, d-lab.2plus, netlab.2plus: Operation Define or edit a configuration:If you want to define a new back printconfiguration:Press New.If you want to edit an existing back printconfiguration:Select the back print configuration to beedited from the list and press Edit.The Back print configurations screen opens (see figure on the following page):NoteThe film mask can also be selected in the Back print configuration screen. However,if a different film mask is selected here and the back print configuration is then saved,it will not be displayed in the list of the superior screen Back print configurations asthere is still another film mask selected there. It will only appear after you select thesame film mask there.Different parameters can be selected for the back print. Which parameters are actuallyavailable depends on the selected film mask:4-88 2005-05-01 / PN 04092_01 AgfaPhoto