RMX 2000 Administrator's Guide - Polycom Support

Chapter 2-Additional Conferencing Information
Creating the Dial-out Link from a Conference Running on
the MGC to the Conference Running on the RMX
2-60
In the same way that the dial-out cascaded link is created in the RMX, you
can create a dial-out participant in the MGC.
In the MGC Manager application, define a new participant as follows:
1 In the Participant Properties dialog box, enter a Participant Name,
select Dial-out and H.323.
2 Define the dialing string as described in step 6 on page 2-56 (both
methods are applicable).
3 In the Advanced tab’s Node Type field, select MCU.
4 Click OK.
1
+
2
3