RMX 2000 Administrator's Guide - Polycom Support

Chapter 16-RMX Administration and Utilities
16-60
2 Move the slider to the number of Audio Only ports to be allocated.
The slider moves in multiples of two, converting CIF video ports to
voice ports in groups of two, with each CIF video port converting to
five voice ports. The minimum number of voice ports that can be
allocated is 10 (2 video ports x 5 voice ports per video port).
3 Click OK.
Configuring the Video/Voice Resources in MPM+
Mode
Resource re-configuration should only be performed when no conferences are
running on the RMX.
There are two Resource Capacity modes in MPM+ Mode:
• Flexible Resource Capacity
• Fixed Resource Capacity
Flexible Resource Capacity
Flexible Resource Capacity is the default resource allocation mode in MPM+
Mode and is functionally identical to the MPM Flexible Resource Capacity
described above.
To allocate Audio Only ports in MPM+ mode:
1 Optional (otherwise skip to step 2): If the RMX is in Fixed Resource
Capacity mode:
a In the RMX menu, click Setup > Video/Voice Port
Configuration.
The Video/Voice Port Configuration dialog box opens.
b In the Resource Capacity Mode box, select Flexible Resource
Capacity.
c Click OK.
2 In the RMX menu, click Setup > Video/Voice Port Configuration.
The Video/Voice Port Configuration dialog box opens.
If switching from Fixed mode, all video resources are allocated as CIF
video ports.
3 Continue with Step 2 of the MPM Mode Flexible Resource Capacity
procedure described above.