RMX 2000 Administrator's Guide - Polycom Support

Chapter 3-Meeting Rooms
3-4
The Meeting Room List columns include:
Table 3-2 Meeting Rooms List Columns
Field Description
Display Name Displays the name and the icon of the Meeting Room in the
RMX Web Client.
(green)
(gray)
An active video Meeting Room that
was activated when the first participant
connected to it.
A passive video Meeting Room that is
waiting to be activated.
Routing Name The ASCII name that registers conferences, Meeting Rooms,
Entry Queues and SIP Factories in the various gatekeepers
and SIP Servers. In addition, the Routing Name is also:
• The name that endpoints use to connect to conferences.
• The name used by all conferencing devices to connect to
conferences that must be registered with the gatekeeper
and SIP Servers.
ID Displays the Meeting Room ID. This number must be
communicated to H.323 conference participants to enable
them to dial in.
Duration Displays the duration of the Meeting Room in hours using the
format HH:MM (default 01:00).
Conference
Password
Chairperson
Password
The password to be used by participants to access the
Meeting Room. If blank, no password is assigned to the
conference. This password is valid only in conferences that
are configured to prompt for a conference password in the
IVR Service.
Displays the password to be used by the users to identify
themselves as Chairpersons. They are granted additional
privileges. If left blank, no chairperson password is assigned
to the conference. This password is valid only in conferences
that are configured to prompt for a chairperson password.
Profile Displays the name of the Profile assigned to the Meeting
Room. For more information, see "Conference Profiles” on
page 1-1.