RMX 2000 Administrator's Guide - Polycom Support

Polycom RMX 2000/4000 Administrator’s Guide
Conference Recording with Codian IP VCR
Conference recording is available with Codian VCR 2210, VCR 2220 and
VCR 2240.
Recording between the RMX and the Codian VCR is enabled by adding
an IP participant to the recorded conference that acts as a link between the
conference and the recording device. This participant is identified as a
recording link to the Codian VCR according to the product ID sent from
the VCR during the connection phase, in the call setup parameters.
The video channel between the conference and the recording device is
unidirectional where the video stream is sent from the conference to the
recorder.
If the Codian VCR opens a video channel to the conference - this channel
is excluded from the conference video mix.
To record a conference running on the RMX using Codian recorder:
>> In the conference, define or add a dial-out participant using the
Codian VCR IP address as the address for dialing.
Once added to the conference, the MCU automatically connects the
participant (the link to Codian VCR) and the recording is
automatically started on the Codian VCR.
A connection can also be defined on the Codian VCR, dialing into the
recorded conference using the MCU prefix and the conference ID as for
any other dial-in participant in the conference.
Monitoring the recording participant:
This connection is monitored as any other participant in the conference.
The connection can also be monitored in the Codian VCR web client.
10-9