RMX 2000 Administrator's Guide - Polycom Support

Polycom RMX 2000/4000 Administrator’s Guide
Table 2-17 New Participant – Dial-out Cascade Link (Continued)
Field Description
Alias Name If you are using the target MCU IP address, enter the
dial string made up of the ID of the cascade enabled
Entry Queue and the Conference ID as follows:
##
For example: 78485##24006
If a gatekeeper is used, you can enter the prefix of
the target MCU, registered with the gatekeeper,
instead of the IP address, as part of the dialing string.
##
For example: 92578485##24006
If the conference has a password and you want to
include the password in the dial string, append the
password to in the dial string after the Conference
ID.
For example: 78485##24006##1234
If the conference has a password and you do not
want to include the password in the dial string, set
the
ENABLE_CASCADED_LINK_TO_JOIN_WITHOUT_
PASSWORD
flag to YES.
For more information see the RMX2000/4000
Administrator’s Guide, “Modifying System Flags” on
page 11-5.
Alias Type Select E.164 (digits 0-9, *, #).
2-71