RMX 2000 Administrator's Guide - Polycom Support

Chapter 10-Recording Conferences
10-2
To define a Recording Link:
1 In the RMX Management pane, click Recording Links ( ).
2 In the Recording Links list, click the New Recording Link (
The New Recording Link dialog box is displayed.
) button.
3 Define the following parameters:
Table 10-1 Recording Link Parameters
Parameter Description
Name Displays the default name that is assigned to the
Recording Link. This field is disabled and cannot be
modified.
IP Address Enter the IP address of the recording system. Users
may either enter the IP Address or Alias or both.
Alias Name / Type If you are using the endpoint’s alias and not the IP
address, first select the type of alias and then enter
the endpoint’s alias: (H.323 ID, E.164,
E-mail ID, Participant Number).
4 Click OK.
The Recording Link is added to the RMX unit.