RMX 2000 Administrator's Guide - Polycom Support

Polycom RMX 2000 Administrator’s Guide
The RMX-SNMP Properties – Security dialog box opens.
This dialog box is used to define whether the query sent to the MCU
is sent from an authorized source. When the “Accept SNMP packets
from all Hosts” is disabled, a valid query must contain the appropriate
community string and must be sent from one of the Manager
terminals whose IP address is listed in this dialog box.
14 Define the following parameters:
Table 16-18 RMX-SNMP Properties – Security Options
Field Description
Send
Authentication Trap
Accept Host
Community Name
Select this check box to send a message to the
SNMP Manager when an unauthorized query is sent
to the MCU. When cleared, no indication will be sent
to the SNMP Manager.
Type the string added to queries that are sent from
the SNMP Manager to indicate that they were sent
from an authorized source.
16-87