RMX 2000 Administrator's Guide - Polycom Support

Table B-1 Alarms (Continued)
Alarm Code Alarm Description
Polycom RMX 2000/4000 Administrator’s Guide
Failed to connect to application server Possible reasons for the failure:
• Failed to connect to application server:
• Failed to establish connection to server, url = [url].
Failed to connect to recording device The MCU could not connect to any of the defined NTP
server for synchronization due to the remote server error.
Failed to connect to SIP registrar Cannot establish connection with SIP registrar.
Failed to create Default Profile Possible reasons for the failure:
• Failed to validate the Default Profile.
• Failed to add the Default Profile.
Failed to initialize the file system Possible reasons for the failure:
• Failed to initialize the file system.
• Failed to initialize the file system and create the CDR
index.
Failed to mount Card folder Failed to mount card folder.
Failed to open Apache server
configuration file
Failed to open Users list file
Failed to register with DNS server
Failed to save Apache server
configuration file
Failure in initialization of SNMP agent.
Failed to open Apache configuration file.
Failed to save Apache configuration file.
Fallback version is being used Fallback version is being used. Restore current version.
Version being used: [running version]; Current version:
[current version].
B-5