RMX 2000 Administrator's Guide - Polycom Support

Chapter 16-RMX Administration and Utilities
16-30
Table 16-2 System Flags – MCMS_PARAMETERS (Continued)
Flag Description
USER_LOCKOUT If YES, a user is locked out of the system after
three consecutive Login failures with same
User Name. The user is disabled and only the
administrator can enable the user within the
system.
Default: NO
Default in Enhanced Security Mode: YES
For details, see "User Lockout” on
page 11-15.
USER
_LOCKOUT
_DURATION
_IN_MINUTES
USER_LOCKOUT_
WINDOW_IN_MINUTES
Defines the duration of the Lockout of the
user.
Value: 0 - 480
0 means permanent User Lockout until the
administrator re-enables the user within the
system.
Default: 0
Defines the time period during which the three
consecutive Login failures occur.
Value: 0 - 45000
0 means that three consecutive Login failures
in any time period will result in User Lockout.
Default: 60
Currently no flags are defined in the CS_MODULE_PARAMETERS
section.
3 To modify a flag value, double-click or select the flag and click the
Edit Flag button.
4 In the New Value field, enter the flag’s new value.