RMX 2000 Administrator's Guide - Polycom Support

Chapter 12-Network Services
12-32
Table 12-2 IP Network Services Properties – RMX CS IP
Field Description
IPv4 IP Address
Default
Router IP
Address
Subnet
Mask
The IP address of the default router. The
default router is used whenever the
defined static routers are not able to route
packets to their destination. The default
router is also used when host access is
restricted to one default router.
The subnet mask of the MCU.
Default value: 255.255.255.0.
IPv6 Scope IP Address
Default
Router IP
Address
Global The Global Unicast IP address
of the RMX.
Site-
Local
The IP address of the RMX
within the local site or
organization.
The IP address of the default router. The
default router is used whenever the
defined static routers are not able to route
packets to their destination. The default
router is also used when host access is
restricted to one default router.