RMX 2000 Administrator's Guide - Polycom Support

Chapter 16-RMX Administration and Utilities
16-52
Table 16-8 RMX Time – Fields Properties (Continued)
Field Description
GMT Time The MCU’s current GMT time settings.
Select the Up or Down cursor to alter the GMT Time
on the MCU.
GMT Offset The time zone difference between Greenwich and
the MCU’s location.
Select the up or down cursor to alter the GMT Offset
time on the MCU.
Get Client Time Click this button to automatically update the MCU's
date, time and time zone to match that of the
workstation.
Use NTP Server Select this check box to synchronize the time with
up to three NTP servers. When selected, the
manual GMT Date & Time setting options are
disabled. However, to implement this mode you are
required to enable an external connection with an
NTP server.
Enter the IP addresses of the required NTP servers
in order of precedence.
The Status field indicates whether registration with
the NTP Server failed or succeeded.
After resetting the MCU a delay may occur when synchronizing with the external
NTP server.