RMX 2000 Administrator's Guide - Polycom Support

Polycom RMX 2000 Administrator’s Guide
The MAX_CP_RESOLUTION flag setting does not affect resource
allocation.
Example: If it is set to SD30, the HD 1080p slider is still displayed and
HD 1080 resources can be allocated. However, HD 1080 participants
will connect at SD30 resolution.
Using the sliders, the administrator can manually allocate resources
to the various types of video resolutions and Audio Only connections
that can be used by connecting endpoints.
3 Move the blue slider buttons to allocate resources.
As all the resources are allocated when the dialog box opens, you
must first free resources of one type by moving the blue slider button
to the left, and then move blue slider button of the required resource
type to the number of resources to be allocated.
On the slider bars, red areas to the left of the blue slider buttons
indicate allocated resources and purple areas to the right of the blue
slider buttons indicate unallocated resources in the system.
Allocated Resources Slider button
Un-allocated Resources
Decreasing CIF Resources increases the number of available
Audio Only, SD, HD720p and HD1080p Resources
16-63