RMX 2000 Administrator's Guide - Polycom Support

Chapter 16-RMX Administration and Utilities
16-24
Table 16-2 System Flags – MCMS_PARAMETERS (Continued)
Flag Description
IVR_ROLL_CALL_USE_
TONES_INSTEAD_OF_
VOICE
When set to YES, the system does not
playback the Roll Call names when
participants enter or exit the conference. If the
voice messages are replaced with tones the
system will play these tones instead.
The use of tones requires the uploading of the
appropriate tone files in *wav format and
replacing the Roll Call Joined and Roll Call
Left message files with the tone files in the
Conference IVR Service - Roll Call dialog box.
When the flag is set to NO, Roll Call names
are announced when participants enter or exit
the conference.
Default: NO.
JITC_MODE When set to YES enables the Enhanced
Security Mode. When enabled, affects the
ranges and defaults of the System Flags that
control:
• Network Security
• User Management
• Strong Passwords
• Login and Session Management
• Cyclic File Systems alarms
Default: NO
For a list of flags affected when the Enhanced
Security Modeis enabled, see "JITC_MODE
System Flag” on page 16-43.
LAST_LOGIN
_ATTEMPTS
If YES, the system displays a record of the
last Login of the user.
Default: NO.
For more details, see "User Login Record” on
page 11-16.