RMX 2000 Administrator's Guide - Polycom Support

Chapter 12-Network Services
12-30
2 Modify the following field:
Table 12-1 Ethernet Settings Parameters
Field Description
Speed The RMX has 3 LAN ports on the RTM-IP (Management,
Signaling and Shelf Management), and additional LAN ports
on each media card (RTM LAN) and RTM ISDN cards. The
administrator can set the speed and transmit/receive mode
manually for these ports.
3 Click the OK button.
Port The LAN port number.
Note: Do not change the automatic setting of
Port 1,4 and Port 5 of the Management 2 and
Signaling 2 Networks. Any change to the speed
of these ports will not be applied.
Speed Select the speed and transmit/receive mode for
each port.
Default: Auto – Negotiation of speed and
transmit/receive mode starts at 1000 Mbits/
second Full Duplex, proceeding downward to 10
Mbits/second Half Duplex.
Note: To maximize conferencing performance,
especially in high bit rate call environments, a
1Gb connection is recommended.